Windshield: must be lexan or polycarbonate.

  Dash board/ Electrical panel: Should have master

                    electrical switch on extreme right hand

                    side as per manufacturer’s location, clearly

                  located and marked. Accessible from out

                    side the car in an emergency.

 Seat :       Type open, but must be MANZ approved.

 Seat Belts: Minimum Five point three inch race belts

                    with either lever lock or cam lock, must be

                     in good condition without any fraying.

                     3 inch 6 Point belts may be used.

  Steering:  All steering components must have

                 safety fasteners such as cotter pins or

                 self locking nuts. Manufactured quick

                 release steering wheel hubs are mandatory.

                 Steering rack is to be Ford laser or Mazda

                 323 only

Exhaust: must conform to local track decibel

                    rulings.  Headers / Muffler are control

                   items and can not be modified except for

                   fuel air analyser probe or extra mount.

Brakes:  Four wheel brakes are mandatory on all

                tracks,Willwood overhang adjustable bias

                Pedal set only.

                Competition-type master cylinders

                allowed. Pad material free.

                Front .Willwood or USB hubs and unvented

                disks, F33i Callipers. Or Cortina for chassis

                numbers 1 –21 as supplied when built.

                Rear. Holden Commodore unvented VN

                type disks and Holden OE callipers only .

                            

 Battery, Fuel System:

                A.   Fuel pump must be mounted outside

                       driver compartment.